|
Model Specific
|
|
|
Adjustment Type:
|
Knob
|
|
Connection Type:
|
Connector, 4-pin M12
|
|
Housing Type:
|
Rectangular
|
|
Optical Block:
|
Type F1, Fiberoptic Adapter
Adapts a sensor to any standard fiber optic light guide with .187" O.D. tips. The light guide is inserted and held in place with a slide-action snap.
|
|
LED Light Source:
|
White - Broadband Spectrum
|
|
Sensing Range:
|
1/4" to 3/8" Proximity Mode 1/2" to 3" Opposed Mode
|
|
Pulse Stretcher:
|
Toggle Switch
|
|
Family Specific
|
|
|
Supply Voltage:
|
12 to 24 VDC Polarity Protected
|
|
Current Requirements:
|
85mA (exclusive of load)
|
|
Output Transistors:
|
(1) NPN and (1) PNP output transistor
NPN: Sink up to 150mA
PNP: Source up to 150mA
Momentary short circuit protected
Output transistors turn “ON” when mark is in view
Anti-pulsing on power-up
|
|
Response Time:
|
Minimum duration of input event
Light state response: 50 microseconds
Dark state response: 140 microseconds
Leading edge variation: less than 20 microseconds
|
|
Hysteresis:
|
Less than 400 millivolts for maximum sensitivity and resolution
|
|
OFFSET/EDR®
Clutch Knob Adjustment:
|
Sets initial level on Contrast Indicator in relation to mid-scale switch point of 5 – functions as sensitivity adjustment
Controls Enhanced Dynamic Range circuit (EDR®) which functions to avoid glare effect
|
|
LIGHT/DARK Switch:
|
Dark position for dark mark; Light position for light mark
|
|
Indicators:
|
OUTPUT INDICATOR - Red LED illuminates when output transistors are “ON”
EDR INDICATOR – Intensity of Green LED provides indication of where in the dynamic operating range the offset / EDR adjustment has been set FULLY LIT: Operating near saturation OFF: Operating near maximum sensing range
CONTRAST INDICATOR –Displays returned contrasting light levels (background vs. mark)
|
|
Light Immunity:
|
Pulse modulated to provide extremely high immunity to ambient light
|
|
Ambient Temperature:
|
-40°C to 70°C (-40°F to158°F)
|
|
Rugged Construction:
|
Chemical resistant, high-impact polycarbonate housing
Waterproof, ratings: NEMA 4X, 6P and IP67
Epoxy encapsulated for mechanical strength
|