LTG风机TW 150系列TWL 150/1064/N技术参数及选型

LTG 拥有90多年的历史，是空气和气候技术的优质供应商。

LTG产品有：感应装置，流量控制器，压力控制器，切断阻尼器等。

Type	LTG TWL 150/1064/N
Max. Medium Temperatures	-13℉ to +250 ℉ (-25 ℃ to +120 ℃)
Nominal impeller length	42.0 inch (1064 mm)
Casing	marine grade aluminum
Impeller	galvanized steel
Ambient temperatures:	-13℉ up to +105℉ ( -25℃ up to +40℃)

LTG风机TW 150系列介绍

TW 150系列切向风机是一款刚性工业级风机，具有增强的防腐蚀保护和高功率密度。

带轴端在驱动侧和滑键的切向风扇。船用级铝制刚性螺栓连接的防腐蚀外壳。镀锌钢板叶轮。叶轮两侧嵌入自调心球轴承。轴承设计寿命为 25 000 小时。反面轴承是减振的。两个轴承都是免维护的。推荐的 V 型皮带轮：型材 SPA 0.49 英寸（12.5 毫米），dw = 6.3 英寸1（60 毫米）。皮带轮的最大额定功率传输为 12 马力。进气口和排气口具有密封平面和插入槽，可准确连接管道和设备。整个风扇（包括轴承间隙等）根据 VDI 2060 平衡至 Q 6.3 级。

The tangential fan series TW 150 is a rigid industrial grade fan with enhanced corrosion protection and high power density.

Tangential fan with shaft end on the drive side and feather key. Rigid bolted, corrosion proof casing of marine grade aluminum. Impeller of galvanized sheet steel. The impeller is both sides bedded in self-aligning ball bearings. Bearing design life is 25 000 hours. The counter-side bearing is vibration dampened. Both bearings are maintenance free. Recommended V-belt pulley: profile SPA 0.49 inch (12.5 mm), dw = 6.3 inch1 (60 mm). The maximum rated power transmission for the pulley is 12 hp. Intake and discharge openings have sealing planes and plug in slots to connect exactly to ducts and appliances. The complete fan (including bearing clearance etc.) is balanced to grade Q 6.3 according to VDI 2060.

LTG风机TW 150系列其他常用型号：

LTG TWR 150/401/N

LTG TWL 150/401/N

LTG TWR 150/601/N

LTG TWL 150/601/N

LTG TWR 150/864/N

LTG TWL 150/864/N

LTG TWR 150/1064/N

LTG TWL 150/1064/N

LTG TWR 150/1264/N

LTG TWL 150/1264/N

LTG TWR 150/1464/N