EI控制器FC-24技术参数及介绍

EI于1974年在美国成立，随后开发了一款用于空气式喷丸机的介质流量阀，命名为MagnaValve。EI MagnaValve产品在市场中深受好评，成为喷丸和喷砂清理市场的完整产品线的推动力之一。EI的产品用于航空航天，汽车，医疗，采矿和许多其他制造应用。

Specifications
Power	24 Vdc @ 0.5 A
Flow Sensor Input	0 – 10 Vdc into 100 K
Servo Output Signal	0 – 10 Vdc
Flow Enable Output	24 Vdc @ 10 mA
Weight	1.3 lb (.59 kg)
Display Range	0 – 1999
Decimal Points	1000, 100.0, 10.0
Alarm Band	0 – 50% of full scale
Alarm Range	0 – 10 seconds
Enable Delay	0 – 10 seconds
Temperature Range	32 – 122 ° F (0 – 50 ° C)

EI控制器FC-24产品介绍

FC-24 控制器为 24 Vdc 系列 MagnaValve、500-24 MagnaValve 和 700-24 MagnaValve 提供闭环系统。MagnaValve和控制器可在需要精确和可重复流量的喷丸和喷砂清理应用中精确调节钢丸。该控制器可以作为独立控件运行，也可以通过标准模拟 0-10Vdc 接口与客户的可编程控制器一起工作。来自 MagnaValve 的流速信号被用作输入信号。

24 伏直流电

以 lb/min 和 kg/min 为单位监测流量

数字显示

高低报警触点

接受远程命令设定值

提供模拟记录器输出

易于面板安装

符合 CE 标准

The FC-24 Controller provides a closed-loop system for the 24 Vdc Series MagnaValve, the 500-24 MagnaValve and the 700-24 MagnaValve. The MagnaValve® and controller provide accurate regulation of steel shot in shot peening and blast cleaning applications where accurate and repeatable flow rates are desired. The controller may operate as a stand-alone control or work with a customer’s programmable controller via standard analog 0-10Vdc interface. Flow rate signal from the MagnaValve is used as the input signal.

24 Vdc

Monitors flow rate in lb/min and kg/min

Digital display

High-low alarm contacts

Accepts remote command setpoint

Provides analog recorder output

Easy panel mounting

CE Compliant

EI控制器其他常用型号：

EI MC

EI POT-24

EI FC